Washington State University

April 13-14, 2020

9:00 am - 4:30 pm

Instructors: Michael Meyer, Sarah Murphy, Nicholas Potter, Alex Kappes

Helpers: TBA

Registration

Due to the COVID-19 outbreak this event is cancelled.

General Information

Software Carpentry aims to help researchers get their work done in less time and with less pain by teaching them basic research computing skills. This hands-on workshop will cover basic concepts and tools, including program design, version control, data management, and task automation. Participants will be encouraged to help one another and to apply what they have learned to their own research problems.

For more information on what we teach and why, please see our paper "Best Practices for Scientific Computing".

Who: The course is aimed at graduate students and other researchers. You don't need to have any previous knowledge of the tools that will be presented at the workshop.

Where: Room 202, PACCAR building (2001 Grimes Way), Pullman, WA. Get directions with OpenStreetMap or Google Maps.

When: April 13-14, 2020. Add to your Google Calendar.

Requirements: Participants must bring a laptop with a Mac, Linux, or Windows operating system (not a tablet, Chromebook, etc.) that they have administrative privileges on. They should have a few specific software packages installed (listed below).

Accessibility: We are committed to making this workshop accessible to everybody. The workshop organizers have checked that:

Materials will be provided in advance of the workshop and large-print handouts are available if needed by notifying the organizers in advance. If we can help making learning easier for you (e.g. sign-language interpreters, lactation facilities) please get in touch (using contact details below) and we will attempt to provide them.

Contact: Please email matthew.brousil@wsu.edu for more information.


Code of Conduct

Everyone who participates in Carpentries activities is required to conform to the Code of Conduct.This document also outlines how to report an incident if needed.


Collaborative Notes

We will use this collaborative document for chatting, taking notes, and sharing URLs and bits of code.


Surveys

Please be sure to complete these surveys before and after the workshop.

Pre-workshop Survey

Post-workshop Survey


Schedule

Day 1

09:00 Automating Tasks with the Unix Shell
10:30 Morning break
11:00 Automating Tasks with the Unix Shell (Continued)
12:00 Lunch break
13:00 Intro to Programming with R
14:30 Afternoon break
15:00 Intro to Programming with R
16:00 Wrap-up

Day 2

09:00 Version Control with Git
10:30 Morning break
11:00 Version Control with Git (Continued)
12:00 Lunch break
13:00 Programming with R
14:30 Afternoon break
15:00 Programming with R
16:00 Wrap-up

Syllabus

The Unix Shell

  • Files and Directories
  • History and Tab Completion
  • Pipes and Redirection
  • Looping Over Files
  • Creating and Running Shell Scripts
  • Finding Things
  • Reference...

Programming in R

  • Working with Vectors and Data Frames
  • Reading and Plotting Data
  • Creating and Using Functions
  • Loops and Conditionals
  • Using R from the Command Line
  • Reference...

Version Control with Git

  • Creating a Repository
  • Recording Changes to Files: add, commit, ...
  • Viewing Changes: status, diff, ...
  • Ignoring Files
  • Working on the Web: clone, pull, push, ...
  • Resolving Conflicts
  • Open Licenses
  • Where to Host Work, and Why
  • Reference...

Setup

To participate in a Software Carpentry workshop, you will need access to the software described below. In addition, you will need an up-to-date web browser.

We maintain a list of common issues that occur during installation as a reference for instructors that may be useful on the Configuration Problems and Solutions wiki page.

The Bash Shell

Bash is a commonly-used shell that gives you the power to do simple tasks more quickly.

Video Tutorial
  1. Download the Git for Windows installer.
  2. Run the installer and follow the steps below:
    1. Click on "Next" four times (two times if you've previously installed Git). You don't need to change anything in the Information, location, components, and start menu screens.
    2. From the dropdown menu select "Use the nano editor by default" and click on "Next".
    3. Ensure that "Git from the command line and also from 3rd-party software" is selected and click on "Next". (If you don't do this Git Bash will not work properly, requiring you to remove the Git Bash installation, re-run the installer and to select the "Git from the command line and also from 3rd-party software" option.)
    4. Ensure that "Use the native Windows Secure Channel library" is selected and click on "Next".
    5. Ensure that "Checkout Windows-style, commit Unix-style line endings" is selected and click on "Next".
    6. Ensure that "Use Windows' default console window" is selected and click on "Next".
    7. Ensure that "Enable file system caching" and "Enable Git Credential Manager" are selected and click on "Next".
    8. Click on "Install".
    9. Click on "Finish".
  3. If your "HOME" environment variable is not set (or you don't know what this is):
    1. Open command prompt (Open Start Menu then type cmd and press [Enter])
    2. Type the following line into the command prompt window exactly as shown:

      setx HOME "%USERPROFILE%"

    3. Press [Enter], you should see SUCCESS: Specified value was saved.
    4. Quit command prompt by typing exit then pressing [Enter]

This will provide you with both Git and Bash in the Git Bash program.

The default shell in some versions of macOS is Bash, and Bash is available in all versions, so no need to install anything. You access Bash from the Terminal (found in /Applications/Utilities). See the Git installation video tutorial for an example on how to open the Terminal. You may want to keep Terminal in your dock for this workshop.

To see if your default shell is Bash type echo $SHELL in Terminal and press the enter/return key. If the message printed does not end with '/bash' then your default is something else and you can run Bash by typing bash.

The default shell is usually Bash and there is usually no need to install anything.

To see if your default shell is Bash type echo $SHELL in a terminal and press the enter/return key. If the message printed does not end with '/bash' then your default is something else and you can run Bash by typing bash.

Git

Git is a version control system that lets you track who made changes to what when and has options for easily updating a shared or public version of your code on github.com. You will need a supported web browser.

You will need an account at github.com for parts of the Git lesson. Basic GitHub accounts are free. We encourage you to create a GitHub account if you don't have one already. Please consider what personal information you'd like to reveal. For example, you may want to review these instructions for keeping your email address private provided at GitHub.

Git should be installed on your computer as part of your Bash install (described above).

Video Tutorial

For OS X 10.9 and higher, install Git for Mac by downloading and running the most recent "mavericks" installer from this list. Because this installer is not signed by the developer, you may have to right click (control click) on the .pkg file, click Open, and click Open on the pop up window. After installing Git, there will not be anything in your /Applications folder, as Git is a command line program. For older versions of OS X (10.5-10.8) use the most recent available installer labelled "snow-leopard" available here.

If Git is not already available on your machine you can try to install it via your distro's package manager. For Debian/Ubuntu run sudo apt-get install git and for Fedora run sudo dnf install git.

Text Editor

When you're writing code, it's nice to have a text editor that is optimized for writing code, with features like automatic color-coding of key words. The default text editor on macOS and Linux is usually set to Vim, which is not famous for being intuitive. If you accidentally find yourself stuck in it, hit the Esc key, followed by :+Q+! (colon, lower-case 'q', exclamation mark), then hitting Return to return to the shell.

nano is a basic editor and the default that instructors use in the workshop. It is installed along with Git.

Others editors that you can use are Notepad++ or Sublime Text. Be aware that you must add its installation directory to your system path. Please ask your instructor to help you do this.

nano is a basic editor and the default that instructors use in the workshop. See the Git installation video tutorial for an example on how to open nano. It should be pre-installed.

Others editors that you can use are BBEdit or Sublime Text.

nano is a basic editor and the default that instructors use in the workshop. It should be pre-installed.

Others editors that you can use are Gedit, Kate or Sublime Text.

R

R is a programming language that is especially powerful for data exploration, visualization, and statistical analysis. To interact with R, we use RStudio.

Video Tutorial

Install R by downloading and running this .exe file from CRAN. Also, please install the RStudio IDE. Note that if you have separate user and admin accounts, you should run the installers as administrator (right-click on .exe file and select "Run as administrator" instead of double-clicking). Otherwise problems may occur later, for example when installing R packages.

You can download the binary files for your distribution from CRAN. Or you can use your package manager (e.g. for Debian/Ubuntu run sudo apt-get install r-base and for Fedora run sudo dnf install R). Also, please install the RStudio IDE.